Welcome to
PATCH
HELL


The Jim Patchell Synthesizer D.I.Y. Web Page

    This website was first posted in December of 1998.
    Last updated Nov 12, 2013

Description: Picture of me    Welcome to my do it yourself analog synthesizer page.  It is a bit more than that, but this is the primary purpose.  I have been building my own analog synthesizers since 1974.  I originally started building the circuits that John Simonton (Paia) published in radio electronics, and I started right in on trying to improve on them.  My first wholly scratch built synth was completed in 1978, and I guess you could say I started out big.  It was a four voice polyphonic synth.  The keyboard scanner was originally implemented using my Polymorphic 8813.  Soon, I changed over to using the 6504 micro processor.
    I stopped for a while, right around 1990, partly because of the nice digital synthesizers that were available then, and even nicer ones now I have to admit (I love my Nord Modular), and also, because no body seemed to care about analog any longer, let alone, building one yourself.  That has all changed now.  Interest in analog synths is back up, and now that I have been introduced to the Internet, I have found out there are a lot of other people out there who share my interest.

    Things are a lot different now than they were.  It seems that finding the custom chips from CEM and SSM is very difficult.  And besides, I don't like to design circuits that use parts that may become unobtainium.  It costs a lot of money to make a PCB, I don't want to have to throw them away because I can't get parts.

    I have started to design a new set of modules.  This projects is now pretty much complete.  There are still a few things that need to be fleshed out, but it is now a fully working synth.  Hopefully, soon, I will be able to do a piece with it.

    Plus, I hope to restore some of the old equipment I built a long time ago.  I have three synths and a vocoder that are full of spider webs.

    Some of the other things you will find on this website are lots of C code.  One of my current projects (as of April 2010) is that I am attempting to write an ACTION! cross compiler for the Atari 800 computers.  This also involves the use of Anagram, a Parser Generator.  It was quite a challenge to write the parser, and I am pretty proud of the fact that I managed it despite the fact I have lost most of my eyesight back in September of 2010.

    I am still praying for the return of my eyesight, along with my very loving wife, and many of my friends.  But life goes on.  My next project will involve making a softcore for the 6502 (like we need another one).

        You will also find things lke real time operating systems, recipes for glutan free food, pictures of cats, paintings, music. etc.

       Everything I am creating will be open source.


Things I am currently occupying my time wityh

August 4, 2012
Updated December 18, 2012
   
ActivityComments
Taking care of my wife while she undegoes chemo therapyThis started in June of 2012.  She finished with the Chemo Therapy at the end of September, and then started Radiation treatment.  She finished the Radiation the first week of Decmber.  She now just has to heal from that, and sometime early next year, she will start the hormone treatments.

Update: It is April 2013 and we are anticipating the start of the Estrogen Inhibitor Therapy.  The oncologist says that this is the most important part of the treatment.  There are still a few hoops to jump thourgh before that can start.
Writing an ACTION! compilerI have been working on this off and on since 2010.  Still not done.  Right now, I am mostly working on the assembler and the linker.  I decided I need to get these two items working before finishing up the comp-iler since  how they work may influence some of the features of the compiler.
Converting the original ACTION! manual into a Microsoft WORD document.This is part of the above project.  I aquired a copy of the action manual that was in pdf format, but it was from a scanned copy of the pages.  This means that my screen reader won't read it.  So, I decided to use an OCR program I found to convert the text in the images back into text, and now I am editing those in a WORD docx document.  So far, I have spent about  a month of spare time working on this, and I am about 1/2 done.  As soon as I am done, I will post it as a standard PDF, DOCX, and Kindle file.
Completed August 17, 2012
AnimationI am gathering the materials so that I can do a claymation animation.  I am planning to do an animation based on a short story I wrote, and that you can find on this website, called Pixies and Nazis.  I have a program called Claymation Studio that I am going to use to do the animation.  I am going to try to use my regular camera instead of the cheazy video camera that came with the program.  I am also going to shoot it on a miniture theater stage that I am going to build, soon.
Cheezy Synth Module BoardThis is a syntheizer project I have been working on for a few months now.  It is going to be a complete monophonic synth on a single board.  It will include 2-VCOs, 1-VCF, 1-VCA, 1-ADSR, 1-Glide, 3 Drum voices, 1-Cymbal voice (very cheesy) and a Midi to CV converter.  The Midi to CV converter is going to be based on the Atmel ATmega2561 AVR microcontroller.  This part has 256k of FLASH, and 8K of RAM..  One of the things I am going to try and do is make this thing Arduino compatable.
CNC MachinesThis is something I have had an interest in for a while.    There is a lot of open source stuff out there to do this.  Although, I am not sure just exactly how good some of it is.  I am researching at the moment.  Making the linear stages is going to be the most difficult thing, probably, and then trying to figure out how to ballance everying.  You need to make sure you get the center of gravity in the right place.

Update:  I have learned quite a bit since I first started looking into this.  Here are some links that you may find useful.

1.   Adafruit Industries

    Adafruit has a lot of useful stuff for making small CNC machines.  They carry both 20mmx20mm aluminum extrusions and 15mmx15mm aluminum extrusions that can be used to build the frames.  They also have linear bearing systems and motors, pullys, plates, etc.

2. Open Builds

    OK, these guys really seem to know what they are doing.  They make what I would call a complete systems of parts.  One of thir up and coming products is called V-Slotl, which is a 20mm aluminum extrusion with a built in V slot that can guide stages.  What is nice about this is you can build a system with a much lower expense that normal extrusions.  At their store they are stocking up so that you will have a one stop place to shop for parts to make machines from.
Book ScannerBook scanners are something I am interested in as well.  I found a very nice open source book scanner on the web.  Although, I am not really too sure how open source it really is.  The plans are very bad, and the sape of the parts is very complicated.  They were designed to be cut out on an NC router.  This pretty much means you have to buy what seems to me to be a very overpriced kit.  Again, I am doing a bit or reasherch to see what may be possible.
A Set of Chimes.It is April 4, 2013, and I have been working off and on for a couple of weeks now on a set of chimes.  My first set is going to be made out of EMT.  Big Mistake.  This stuff is hard and that makes it difficult to work with.  So far I have the C5 pipe cut and tuned.  The F5 pipe is still a bit flat.  Taking metal off these things is not easy.
Disney Pump Organ from the Snow White and the Seven Draves.Ok, this is just plain silly.  Down below you will find a link to my page where I express my desire to do this.  But I am actually in the planing stage.  First off, the instrument as illustrated in the cartoon can't possibly work.  But, that is what makes it such a challenge.  I am going to use the metaphore of an Analog Polyphonic Synthesizer to make this thing work.  My plan for right now is to have 6 pipes that are basiclly going to just be recorders.  The holes will be covered  by flaps carved to look like hands and the holes will be surounded by the face of a drarf.  Each pipe will only be able to play one note at a time, but by using techniques similar to an Analog Polyphonic Synthesizer, I will have an instrument that will play six notes at a time.  The animation of the hands opening up the holes should be hilarious, just as it was in the movie.
 Open OTA April 28, 2013  This is a project to create an open source Operational Transconductance Amplifier.
 The Game RiskNovember 12, 2013.  This will be the first game I have ever written.


March 2, 2012
Integrated Circuits that Changed My Life

    I read an article today about the 25 ICs that shook the world.  I thought I would make a list of the ICs that were influential in my life.

    1970

            I wanted to build an UP-DOWN counter.  Don't ask me why.  In 1970 this seemed like a very big challenge.  I was originally going to use discrete transistor flip flops and logic.  But that was a lot of parts.  Then I discovered the Motorola HEP series of parts, that included  JK filp flops and NOR gates in a TO99 can.  So, I built my up down counter.  It was still a rats next of wires.  But it worked.  I have no idea what ever happened to that project, but I do still have the ICs  If I could see the numbers on the cans, I would list the part numbers.

    1974  LM324

        I did a lot with this IC.  The first one I ever saw was one my father brought home that he had received as a free sample.  And the project that I did with this part?  Why, it was a VCO for the synthesizer I was building at the time.

    1976  DG201

    Discovering this chip was a big deal.  Four analog switches in a single pacage allowed me to do some really cool things.  I have never been without them since.

    1976 CA3096

    This was a transistor array with 3 NPN and 2 PNP (lateral) transistors in it.  This was my introduction to the OTA.  I used these parts to make OTAs for filters and what have you.  Somewhere, I still have a filter that uses these parts.

    1976  CA3080

    I soon discovered the CA3080, which was an OTA in a can.  I started using this part instead of the CA3096 mostly because it was about 1/2 the price.

    1977 6502, 6504

    My first computer was a Polymorphic Poly88 computer.  This was an 8080 based machine.  And I used this as noted above to control my fist synthesizers.  I always found the 8080 instruction set to be kind of clumsy.  Then I read an article by John Simonton about the Paia 8700 controller, which I later bought.  When I read the code listings, I realized that this was a processor that was designed to be programmed. At first  I would assemble the code by hand, and punch the code into a 2708 EProm programmer that I got from JAMES ELECTRONICS (now Jameco).  Despite the tortures of programming this way, I felt that the results were much better.  I eventually ended up with quite a developement system  when I purchased my Atari 800 and an Arium 4100b logic analyzer with a 6502 pod on it.

    1978 CA3280

    When I saw the ad for this part in EDN, I knew that this was going to be an important part.  I got a couple of samples right a way, and checked them out.  They were everything I could want, and more.  I immediately found a distributor and ordered a 100 of the suckers.  This is one chip I really miss.  As many of you may know, it is no longer made.

    1985 MC68000

    When I was finally able to afford to purchase one of these chips, I thought I had died and gone to heaven.   I eventually purchased, in 1989, the SDS Cross Code C for the 68000 and just had myself a lot of hacking fun.

    1992 XC4003

    This was the first FPGA I ever used.  It had a wopping 3000 equivalent gates and it cost $275 at the time.  I used it in a servo controller design I did for Teletrac.  That got me in a love affair with FPGAs.  Although, with my current handicap, are not easy to use.

    1998 AT90S8515

    This was the first AVR I ever used.  I was at the time trying to decide between the AVR and the PIC, and the AVR won out for technical reasons.  The AVR series is very easy and inexpensive to use.  It is still my first choice for projects.




Electrical Engineering Resources

 

 

Description: EE Web

 

 


 I'm a Maker, You can be a Maker TOO!

Sources for making projects.

    Open Builds

        They offer parts for making linear stages and CNC machines.

    Inventables

        They offer all sorts of goodies, including 20mm extrusions, linear motion systems and CNC

    Sparkfun Electronics

        They offer a wide selection of parts, boards, modules, hardware, etc.  

        AdaFruit Industries
            They offer a good variety of stuff.  Parts, boards, modules, CNC.

    Mouser Electronics

        Mouser is a distributor that carries an extremely large inventory of electronic parts.  This is the place to go if you need your parts at a good price and in moderate to high quantities.

    Digikey

             Like mouser.  I use both places.  quite often you can find something at one and not the other.

Want to be added to this list?  Send me an email.

    Synth Module Boards

SMB1

SMB2

SMBC (Cheezey)

Blackmer Synth Module Board


 The Arduino


Intrerfacing the Spartan 3 Starter Kit to an Atmel STK500/501 to make a Digital Synthesizer

 


Pacific South West Synthesizer DIY Meet on June 10, 2006


 

MS20 DIY Project


The Start of the DSM1 Digital Synthesizer Module


 

Pacific Southwest DIY Meet 2004 Photos

 


Pacific Southwest DIY Meet 2003 Photos


Synth Modules For Sale
Parts For Sale


Synthesizer Project


The Jim Patchell Verilog and VHDL Archive


Strobe Tuner Project


 

The Jim Patchell Gluten Free Webpage

Gluten Free Cookie Recipes


Windows Programming Examples


Building Odd Musical Instruments


DIY Audio Webpage


Mikado Analog Sequencer


Keyboard Encoder Project


Radio Projects


Interfacing Ethernet to Midi


Loss of my Eyesight


The Secrets of Compilers

Recursive Descent Parsing


Animation


Marion Systems MS68K Single Board Computer


The love of my life

 

Here are some photos from early outings I had with Noni...Now, on the first two, you will note, I did not take any pictures of Noni...I am not exactly sure why that was.  These were pretty early dates...and I was still not exactly sure how Noni felt about me...I just don't know...:-)

A Day at the Botanic Gardens
A day at the Zoo

Walks With Noni

 


Well, in case somebody didn't know...I now have a very lovely young lady in my life.  Noni Kimbel and myself are getting married on December 30, 2006 at the First Presbyterian Church in Santa Barbara, California.  The Christmas party was very important.  Because of my work, I was not able to go north to Seattle to celebrate the holidays with my family.  The Kimbels were very gracious in sharing the day with me.  Little did any of us know that a mere six days latter our two families would be joining.  It was on December 31, 2005 that I proposed marriage to Noni.

 

Christmas Party 2005 with the Kimbels


Christmas Day 2005 with the Kimbels

It
was, however, 10 days latter that I go the answer...
Noni Says Yes

And about two months after that Noni finally got her ring.
Noni's 50th Birthday

 

 

 


Other Links on this website


          Misc Code Samples

          Secrets of the OTA
          Spindle Controller and Spin Stand
          My First Synthesizer Project
         Old Data Sheets
         Synth DIY FAQ web page
         Protel PCB Utilities
         Polyphonic Synthesizer Boards
         Control Voltage Splitter
         Roland MT32 firmware mods
         Transistor vbe matcher
         Seven Segment Decoder Pal
         My Home Studio
         Voltage Controlled Vocal Filter Experiments
         Archives of some old drawings and articles(new)
         DIY Digital Synthesizer page

         Paia 8700 
         SMB-1  

         Old VCO Circuit
         Midi To Relay Controller
         
         Midi to CV interface
         Do It Yourself Tips
         Restoring one of my old Homebuilt Synthesizers
         Links

         Do It Yourself Mixers
         Microprocessor Page
         Tau Synth Circuits
        
         Power Supply Tips
         Use full Components for Synthesizers
         TX816 Editor for Atari ST computer
         Bell Labs Voice Synthesizer


Picture of Various Things

        pictures of my home made electronic equipment
         Don't you hate it when people post pictures of themselves
         The Family Piano
          My Work Room


Manuals

     Schematic and owners manual for the Korg Poly 800


My Music

This is a collection of some of my music.  I am a Joplin fan, so that is what I tend to do.

    1. The Strenuous Life by Scott Joplin(mp3 3.5M)

    2. The Entertainer by Scott Joplin (MP3)

    3. Elite Syncopations by Scott Joplin (MP3)
    4. The Cascades by Scott Joplin (MP3)
    5. The Chrysanthemum by Scott Joplin
    6. The Great Crush Collision March by Scott Joplin (MP3)
    7. Maple Leaf Rag by Scott Joplin (MP3)

      Equipment used (sorry, old recording, no SYNTH DIY in this one):

            Yamaha TX816, Yamaha TX81z, Yamaha FB-01, Kawai K1r, Oberheim XK controller, Yamaha SPX90, Teac 40-4, Art 2408, Marantz PMD430.  Digital Mastering was done on an Echo Layla.  Midi Sequencing Atari Mega ST4 running Cubase 2.0.
 
 


Jim's Movie

    This is an 8 mm movie I made from about 1997 to 1970.  There isn't much editing.  Think of it as a bunch of raw footage.  I used various items to animate, as well as using the neighbor  kids as victims .  I suppose you could say the show Laugh In had a bit of influence on me.  This was shot with a Bell and Howle 8mm movie camera.  Not a great movie camera, but we had fun.


MP4 version of Jims Move (33 MB)


The Literary Section

    Books I have read
    Stories I have written


Santa Barbara Atari Computer Enthusiasts (SBACE)

    Yep, I own Atari Computers. 

        Recreating the ACTION! compiler for the Atari.

     Read all about mine and the Atari Club


Atari ST Files

    Music Studio Files



Model Railroading

     South Coast Society of Model Engineers
    Model Railroad
     Union Pacific Transportation Innovation


    Painting


Patchell Family History



  Anyway, all for now.  Hope to hear from you all.
 

     jim patchell
  patchell@cox.net